20″ Inches Orbitec Planetary Diamond Tool Driver

Description

The Hawk Orbitec Planetary Driver makes quick work of polishing large concrete and stone areas. Six independent sealed ball bearing pedestals spin 3” tools up to 400 RPM. Orbitec extends tool life through cool running. The Orbitec with counter-rotating heads work 60% faster than fixed tool drivers. Engineered Design • The Orbitec Driver mounts under most conventional design 1.5 HP / 175 RPM floor machines • The aluminum clutch plate is custom milled to provide easy on and off mounting • Three sizes for use on 13”, 17” and 20” floor machines • The electroplated 1/2” thick steel drive plate is built with six tool-holding pedestal heads • These pedestals with are built with tool holding hook facing, securely mounting round diamond tools with hook-and-loop backing. Diamond tools are quickly changed without shop tools. • The floor machine drives the Orbitec plate at 175 RPM in a clockwise direction. The pedestals spin 3” diamond tools at 400 RPM in a counter clockwise direction. This counter- rotating operation drives diamond tools 60% faster than fixed mount drivers. • Add the optional dust ring and vacuum hose mounting kits to your Hawk floor machine for dust containment • Add optional machine weights on your Hawk floor machine for greater down pressure and faster floor prep results • Order diamond tools separately

Spec Sheets

User Manual