Orbitec Planetary Diamond Tool Driver – 13 Inch

Description

The Hawk Orbitec Planetary Driver makes quick work of polishing large concrete and stone areas. 3 or six independent sealed ball bearing pedestals spin 3” tools at 400 RPM. Orbitec extends tool life through cool running. The Orbitec with counter-rotating heads work 60% faster than fixed tool drivers. Engineered Design • The Orbitec Driver mounts under most conventional design 1.5 HP floor machines • The aluminum clutch plate is custom milled to provide easy on and off mounting • Three sizes for use on 13”, 17” and 20” floor machines • The electroplated 1/2” thick steel drive plate is built with six tool-holding pedestal heads • These pedestals with are built with tool holding hook facing, securely mounting round diamond tools with hook-and-loop backing. Diamond tools are quickly changed without shop tools. • The floor machine drives the Orbitec plate at 165 RPM in a clockwise direction. The pedestals spin 3” diamond tools at 400 RPM in a counter clockwise direction. This counter- rotating operation drives diamond tools 60% faster than fixed mount drivers. • Add the optional dust ring and vacuum hose mounting kits to your Hawk floor machine for dust containment • Add optional machine weights on your Hawk floor machine for greater down pressure and faster floor prep results • Order diamond tools separately

          Spec Sheets